DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Network Mask Missing
- splunkydunky
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
15 Jul 2010 15:28 #62877
by splunkydunky
Network Mask Missing was created by splunkydunky
Help please. I just received a static ip address from BT. In the vigor2820n internet access screen I have set the fixed ip to yes and entered the fixed ip address but there is no field to enter the network mask. Am I doing something wrong? Current Firmware Version: 3.3.3_232201
Regards
Mick
Regards
Mick
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
15 Jul 2010 17:09 #62881
by voodle
Replied by voodle on topic Network Mask Missing
You only need to set the subnet mask if you're using IP routing (LAN - General Setup - 2nd IP Address), otherwise just enter one fixed IP in the fixed IP setting, then use WAN IP alias to configure the rest.
Please Log in or Create an account to join the conversation.
- limes102
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
16 Jul 2010 08:28 #62894
by limes102
Replied by limes102 on topic Network Mask Missing
Yep
Also, it might be a fixed IP but it might be assigned dynamically.. So you might not have to set it on your router
Also, it might be a fixed IP but it might be assigned dynamically.. So you might not have to set it on your router
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek