DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
SMTP Route
- andyjuk
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
15 Jul 2010 19:05 #62887
by andyjuk
SMTP Route was created by andyjuk
Hi all,
I have a 2820 with both the ADSL and Ethernet WAN ports connected.
I want to route our SMTP traffic so that it ALWAYS goes along WAN1
any ideas on how to do this?
I have a 2820 with both the ADSL and Ethernet WAN ports connected.
I want to route our SMTP traffic so that it ALWAYS goes along WAN1
any ideas on how to do this?
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
15 Jul 2010 22:55 #62892
by voodle
Replied by voodle on topic SMTP Route
Fairly easy to do, go to WAN - Load balance policy, on there click on of the Index / links that isn't used. If you've got the "auto failover" tickbox then you're on the right page, set it up like so:
protocol: any
WAN: WAN1 - leave auto failover ticked (or unticked if SMTP won't work through WAN2 without reconfiguring)
source / destination IP - ignore
destination port start+end: 25
OK that and it should put any new SMTP traffic over WAN1
protocol: any
WAN: WAN1 - leave auto failover ticked (or unticked if SMTP won't work through WAN2 without reconfiguring)
source / destination IP - ignore
destination port start+end: 25
OK that and it should put any new SMTP traffic over WAN1
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek