DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 Blocking Cisco Traffic
- willow
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 16
- Thank you received: 0
19 Jul 2010 09:38 #62920
by willow
2820 Blocking Cisco Traffic was created by willow
Hi,
One of our clients uses a Cisco network and we have to connect to them using the Cisco VPN client. We can connect fine however our Draytek is blocking all traffic though (cant get anything though or from the other side over VPN)
Searching about this seems to be an issue with SPI but we cant disable it as theirs no options (and possibly not feasible) the crappy BeBox which up to now we were using in bridge mode doesn't have this issue but were now having to run two internal lans which is causing us a lot of grief and a support headache not to mention keeping us online with both ISPs involves lots of magic.
One of our clients uses a Cisco network and we have to connect to them using the Cisco VPN client. We can connect fine however our Draytek is blocking all traffic though (cant get anything though or from the other side over VPN)
Searching about this seems to be an issue with SPI but we cant disable it as theirs no options (and possibly not feasible) the crappy BeBox which up to now we were using in bridge mode doesn't have this issue but were now having to run two internal lans which is causing us a lot of grief and a support headache not to mention keeping us online with both ISPs involves lots of magic.
Please Log in or Create an account to join the conversation.
- willow
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 16
- Thank you received: 0
19 Jul 2010 09:38 #62921
by willow
Replied by willow on topic 2820 Blocking Cisco Traffic
Subscription
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
19 Jul 2010 23:54 #62931
by voodle
Replied by voodle on topic 2820 Blocking Cisco Traffic
Have you checked whether the cisco VPN network is on the same LAN IP subnet as the Draytek? If it is, that'd cause the problems that you're seeing.
Also, check whether the router's DoS defense (under firewall) is enabled, the UDP flood defense could cause that too.
Also, check whether the router's DoS defense (under firewall) is enabled, the UDP flood defense could cause that too.
Please Log in or Create an account to join the conversation.
- willow
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 16
- Thank you received: 0
20 Jul 2010 09:19 #62935
by willow
Replied by willow on topic 2820 Blocking Cisco Traffic
Nope were on a 172. subnet with the vpn being on a 10.
Its purely the draytek. If I plug in the ADSL2+ Modem here and configure it for standard DHCP and Nat on 192.168.1.x everything works fine. Configure the draytek for the same range and put the ADSL2+ modem into bridge mode then everything works but.
At the moment were having to run the ADSL2 modem on a parallel subnet and dual home our machines with set static routes in windows just to get it working.
Its purely the draytek. If I plug in the ADSL2+ Modem here and configure it for standard DHCP and Nat on 192.168.1.x everything works fine. Configure the draytek for the same range and put the ADSL2+ modem into bridge mode then everything works but.
At the moment were having to run the ADSL2 modem on a parallel subnet and dual home our machines with set static routes in windows just to get it working.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek