DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Cannot forward any ports ... Please Help
- skingswell
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
11 Aug 2010 11:07 #63278
by skingswell
Replied by skingswell on topic Cannot forward any ports ... Please Help
Thanks guys for your help...
I have port forwarding working on anything other than SMTP. If I port scan from the internal network port 25 is not open on the router. I can port scan the router externally and see that port 3389 is open for example and this all works fine.
The email server is on the internal network. I have completely disabled all firewalls and even setup a different email server on a different server.
Port 25 is open on the 2 mail servers.
I am completely confused. Why would SMTP be any different?
The external IP of the site at one point was blacklisted because of a mess up with the ISP. If I check the IP address again it is coming up as being black listed with a few sites. Would that affect the telnet to port 25.
I have port forwarding working on anything other than SMTP. If I port scan from the internal network port 25 is not open on the router. I can port scan the router externally and see that port 3389 is open for example and this all works fine.
The email server is on the internal network. I have completely disabled all firewalls and even setup a different email server on a different server.
Port 25 is open on the 2 mail servers.
I am completely confused. Why would SMTP be any different?
The external IP of the site at one point was blacklisted because of a mess up with the ISP. If I check the IP address again it is coming up as being black listed with a few sites. Would that affect the telnet to port 25.
Please Log in or Create an account to join the conversation.
- rpg
- Offline
- Member
Less
More
- Posts: 102
- Thank you received: 0
11 Aug 2010 16:57 #63283
by rpg
Replied by rpg on topic Cannot forward any ports ... Please Help
Either your ISP is blocking Port 25 traffic (which some do) or secondly, have you checked that none of the Draytek Management ports have been changed to work on a non default (port 25) port. Check that from System Maintenance -> Management.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek