DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820n - Firmware Killed the Router....
- pauloamore
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
02 Aug 2010 09:18 #63095
by pauloamore
Paulo
2820n - Firmware Killed the Router.... was created by pauloamore
I was having terrible internet connection speeds on a WDS configured 2820 so I tried the firmware update....
I got a warning that the firmware update cad a problem and that the router would die at reboot. It did....
Router has three left green LEDS flashing (ACT / USB / CSM).
I've tried the old TFTP tool and the router upgrade tool.
- I've made sure I'm on the correct subnet and I remain unable to load the firmware.
I rebooted the router with the reset button held down to little effect.
Any ideas ladies and gents would be gratefully received.
With thanks in advance
Paulo
I got a warning that the firmware update cad a problem and that the router would die at reboot. It did....
Router has three left green LEDS flashing (ACT / USB / CSM).
I've tried the old TFTP tool and the router upgrade tool.
- I've made sure I'm on the correct subnet and I remain unable to load the firmware.
I rebooted the router with the reset button held down to little effect.
Any ideas ladies and gents would be gratefully received.
With thanks in advance
Paulo
Paulo
Please Log in or Create an account to join the conversation.
- pauloamore
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
02 Aug 2010 20:56 #63108
by pauloamore
Paulo
Replied by pauloamore on topic 2820n - Firmware Killed the Router....
Note to self... switch off the windows firewall.
doh.
doh.
Paulo
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek