DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Isolating device on VLAN
- timboellis
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
14 Aug 2010 21:16 #63345
by timboellis
Isolating device on VLAN was created by timboellis
I have a NAS box attached to my 2800VG but I do not want any other devices on the network able to see it wired or wireless, however still be able to see this via the Web as I use this was a remote backup.
I have tried it myself without little success can someone advise
I have tried it myself without little success can someone advise
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
14 Aug 2010 21:39 #63351
by voodle
Replied by voodle on topic Isolating device on VLAN
On the 2800 you can use the port based VLAN to block access to it - that's under LAN then VLAN, on there make one VLAN with the port that the NAS is plugged into and another VLAN with the rest of the ports.
I'm not sure how you would block it via wireless though, the 2800's WLAN VLAN setup is rather confusing but there should be some stuff onwww.draytek.com under support > application notes that would explain it.
I'm not sure how you would block it via wireless though, the 2800's WLAN VLAN setup is rather confusing but there should be some stuff on
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek