DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working
- rizzir
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
19 Aug 2010 08:49 #63415
by rizzir
Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working was created by rizzir
Hi All,
Has anyone working 2820VN Router
On Firmware 3.3.4
With O2 ISP / ADSL ?????
My 2820VN Router was on firmware 3.3.0, which i upgarded it to Firmware 3.3.4 and now its not working.
i am using following settings.
2. Click on tab 'MPoA(RFC1483/2684) and enable
3. a. Change Multi-PVC channel to channel 2
b. VPI = 0
c. VCI = 101
d. Modulation = ADSL2+(G.992.5)
e. WAN Connection Detection Mode = Arp Detect
f. Select obtain an IP address Automatically
No Joy at all.
after spending 3 hours lastnight I gave up.
Tonight i will apply firmware 3.3.3, and see if i can get it to work.
Has anyone working 2820VN Router
On Firmware 3.3.4
With O2 ISP / ADSL ?????
My 2820VN Router was on firmware 3.3.0, which i upgarded it to Firmware 3.3.4 and now its not working.
i am using following settings.
2. Click on tab 'MPoA(RFC1483/2684) and enable
3. a. Change Multi-PVC channel to channel 2
b. VPI = 0
c. VCI = 101
d. Modulation = ADSL2+(G.992.5)
e. WAN Connection Detection Mode = Arp Detect
f. Select obtain an IP address Automatically
No Joy at all.
after spending 3 hours lastnight I gave up.
Tonight i will apply firmware 3.3.3, and see if i can get it to work.
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
19 Aug 2010 10:34 #63417
by rothers
Replied by rothers on topic Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working
Did you upgrade to 3.3.4 with .all or .rst ?
Please Log in or Create an account to join the conversation.
- rizzir
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
19 Aug 2010 10:43 #63418
by rizzir
Upgraded to.all
Replied by rizzir on topic Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working
Did you upgrade to 3.3.4 with .all or .rst ?rothers wrote:
Upgraded to.all
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
19 Aug 2010 15:50 #63427
by rothers
Replied by rothers on topic Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working
.all upgrade with 3.3.4 has been known to result in corrupted firmware.
I'd try applying 3.3.3 .all and if that doesn't work make a note of your settings then apply 3.3.3 .rst
I'd try applying 3.3.3 .all and if that doesn't work make a note of your settings then apply 3.3.3 .rst
Please Log in or Create an account to join the conversation.
- dbames
- Offline
- Junior Member
Less
More
- Posts: 60
- Thank you received: 0
03 Sep 2010 10:05 #63651
by dbames
Replied by dbames on topic 3.3.4_rc10
I'm happily running 3.3.4_rc10 on a 20mb O2 LLU line with my 2820Vn. I've not moved up to the final release due to the bugs in DHCP and MAC address binding.
Please Log in or Create an account to join the conversation.
- thehollster
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
14 Dec 2010 13:49 #65246
by thehollster
Replied by thehollster on topic Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working
I have the same problem and have tried all recent firmwares with the .rst and .all. I cannot get BE working. I get ADSL showtime and WAN1 all stays red with no IP, GW IP and all zeros.
My connection was working before I asked BE to change me to AnnexA and fastpath. It was on Annex M. I may have to ask them to switch me back in the meantime.
Help!
My connection was working before I asked BE to change me to AnnexA and fastpath. It was on Annex M. I may have to ask them to switch me back in the meantime.
Help!
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek