DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2820 - load balancing

  • unrealone1
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Aug 2010 17:20 #63462 by unrealone1
Draytek 2820 - load balancing was created by unrealone1
Hi all,

I have 2 BT lines with a different ISP on each.

I have a Draytek 2820 router which works fine on the first BT line, I want to configure the 2nd bt line so I have a fall over should the first ISP broadband go down etc.

Do I need another modem? How do I need to configure the draytek2820?

Please Log in or Create an account to join the conversation.

More
23 Aug 2010 07:55 #63465 by steve76
Replied by steve76 on topic Draytek 2820 - load balancing
Hi,

Well, yes you need a second modem, if you have another BT Line ( Like you do with the first line.. I guess )

If you want to use the WAN2 as a fail over
-> WAN -> General Setup and tick : WAN2 -> WAN1 failed

Please Log in or Create an account to join the conversation.

More
23 Aug 2010 07:56 #63466 by steve76
Replied by steve76 on topic Draytek 2820 - load balancing
I forgot to say :

If you want to use both Internet :

Concerning the Load balancing, nothing to do. This is done automatically.
If you need to specify an outgoing line, you need to go to : WAN -> Load balancing policy..
Otherwise, nothing to do use your both Internet access

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami