DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Setting your default route to WAN2, not WAN1
- ghenry
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank you received: 0
04 Sep 2010 21:19 #63672
by ghenry
Setting your default route to WAN2, not WAN1 was created by ghenry
Hi,
We have ADSL on WAN1 (obviously), but we've just got a fibre connection into our office and have it plugged into WAN2.
How can we set our default gateway and therefore all traffic to go out via that instead of WAN1?
I've tried via telnet:
IF4 is as per
doesn't work!
We have ADSL on WAN1 (obviously), but we've just got a fibre connection into our office and have it plugged into WAN2.
How can we set our default gateway and therefore all traffic to go out via that instead of WAN1?
I've tried via telnet:
Code:
ip route status
ip route del 0.0.0.0 0.0.0.0 default
ip route add 0.0.0.0 0.0.0.0 OUR_GATEWAY_IP IF4 default
IF4 is as per
Code:
:0=LAN,3=WAN1,4=WAN2
doesn't work!
Please Log in or Create an account to join the conversation.
- ghenry
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank you received: 0
04 Sep 2010 22:07 #63673
by ghenry
Replied by ghenry on topic Re: Setting your default route to WAN2, not WAN1
Changing the Load balancer policy to have WAN2 first in the list and WAN1 second makes all traffic go out.
I've confirmed this from an internal network traceroute. Routing table is still the same but it works.
Thanks.
I've confirmed this from an internal network traceroute. Routing table is still the same but it works.
Thanks.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek