DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Not sure if this is possible...
- adwhite
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
10 Sep 2010 13:02 #63738
by adwhite
Not sure if this is possible... was created by adwhite
Hi,
I've got a draytek 2820 using ip network address of 192.168.1.xxx, but I've got to attach a piece of kit to the network that has a default ip address of 192.168.0.232. Supposedly when I can see it (via telnet) I can change the default address to 192.168.1.xxx.
The problem is how do I see it, I've plugged it into the switch but I can't ping it or see it.
Any suggestions?
Cheers
Andy
I've got a draytek 2820 using ip network address of 192.168.1.xxx, but I've got to attach a piece of kit to the network that has a default ip address of 192.168.0.232. Supposedly when I can see it (via telnet) I can change the default address to 192.168.1.xxx.
The problem is how do I see it, I've plugged it into the switch but I can't ping it or see it.
Any suggestions?
Cheers
Andy
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
10 Sep 2010 13:11 #63739
by rothers
Replied by rothers on topic Not sure if this is possible...
Manually set your PC to IP 192.168.0.yyy temporarily then you'll be able to see it.
Please Log in or Create an account to join the conversation.
- adwhite
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek