DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2920 and IPv6
- markcpowell
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
27 Sep 2010 13:19 #63981
by markcpowell
2920 and IPv6 was created by markcpowell
Question: Does the 2920 support IPv6?
I ask because I currently have an Airport Extreme base station and a Vigor 120. Even though the Airport supports IPv6 routing, it cannot do this over PPPoE, which is how it connects to the Vigor 120 and thus to my ISP.
I plan to connect the Vigor 120 (with latest firmware 3.2.4.4) to the 2920 WAN port, use the 2920 to create the PPPoE connection and then connect the Airport using the Ethernet / TCP/IP Bridge option. I'm assuming (because I can't get any info) that this will allow my Airport to pick up and use the native IPv6 that my ISP (AAISP) send to my line.
Will this work, or will I have to shell out for the Cisco 877?
Many thanks
Mark
I ask because I currently have an Airport Extreme base station and a Vigor 120. Even though the Airport supports IPv6 routing, it cannot do this over PPPoE, which is how it connects to the Vigor 120 and thus to my ISP.
I plan to connect the Vigor 120 (with latest firmware 3.2.4.4) to the 2920 WAN port, use the 2920 to create the PPPoE connection and then connect the Airport using the Ethernet / TCP/IP Bridge option. I'm assuming (because I can't get any info) that this will allow my Airport to pick up and use the native IPv6 that my ISP (AAISP) send to my line.
Will this work, or will I have to shell out for the Cisco 877?
Many thanks
Mark
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek