DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2930 with NAT and routed IP with 2 x ADSL connections
- marksim
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
28 Sep 2010 15:34 #63996
by marksim
Vigor 2930 with NAT and routed IP with 2 x ADSL connections was created by marksim
My setup is a Vigor 2930 with 2 x vigor 120 connected to 2 x ISP's.
I have a IP range of 192.168.0.* with LAN clients, also a 2nd routed IP range with the 5 IP's provided by the ISP.
With a single ADSL this works fine, but if you connect the 2nd the routed IP machines lose connection for random periods of time.
Looks like a bug with the working of the load balancing not realising that the routed IP can only go over 1 connection.
I've tried a entry in the load balance policy for the routed IP's to go via the right WAN connection but the problem persists.
Any comments?
Mark Simcock
I have a IP range of 192.168.0.* with LAN clients, also a 2nd routed IP range with the 5 IP's provided by the ISP.
With a single ADSL this works fine, but if you connect the 2nd the routed IP machines lose connection for random periods of time.
Looks like a bug with the working of the load balancing not realising that the routed IP can only go over 1 connection.
I've tried a entry in the load balance policy for the routed IP's to go via the right WAN connection but the problem persists.
Any comments?
Mark Simcock
Please Log in or Create an account to join the conversation.
- pete421
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
03 Oct 2010 20:48 #64072
by pete421
Replied by pete421 on topic Vigor 2930 with NAT and routed IP with 2 x ADSL connections
In WAN > Load Balancing tie the specific ISP range to the correct WAN
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek