DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
NAT multiple source subnets to a single external IP
- csxpcm
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
06 Oct 2010 16:13 #64114
by csxpcm
NAT multiple source subnets to a single external IP was created by csxpcm
Dear all,
My questions relates to a Draytek Vigor 2820Vn.
I want to run 3 private subnets:
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
Using the VLAN functionality. Each VLAN will map to a different subnet.
However, my question specially relates to NAT. Is it possible to NAT each of these internal subnets to a single public IP address.
Is this functionality configured using the 'NAT - Address Mapping' function?
Thankyou for your time.
My questions relates to a Draytek Vigor 2820Vn.
I want to run 3 private subnets:
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
Using the VLAN functionality. Each VLAN will map to a different subnet.
However, my question specially relates to NAT. Is it possible to NAT each of these internal subnets to a single public IP address.
Is this functionality configured using the 'NAT - Address Mapping' function?
Thankyou for your time.
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
07 Oct 2010 11:27 #64131
by voodle
Replied by voodle on topic NAT multiple source subnets to a single external IP
That's really not going to work I think, most of the draytek routers only do one NAT subnet. NAT - Address mapping is for forcing local IP addresses / ranges to use a specified public IP address
The 3300 series can do up to 4 though and has full 802.1Q VLAN tag support
The 3300 series can do up to 4 though and has full 802.1Q VLAN tag support
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek