DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Help! 2820Vn bricked?
- clarkac
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
08 Oct 2010 18:36 #64156
by clarkac
Andy Clark
Help! 2820Vn bricked? was created by clarkac
After noticing a problem with firmware 3.3.4 (web pages not showing when accessed through VPN) I decided to go back to 3.3.3. which had been solid. After a few seconds of updating the firmware, contact was lost with the router - but never returned. Eventually I power cycled the router, but no joy. Now the lights seem to be in a loop - first 3 left lights solid, then ACT flashes slowly, then is steady, then all lights flash, then the 3 left hand ones are on, then it clicks (powers off?) and starts over. I can't access it at all. So, I have tried a hardware reset, but the ACT light goes solid and doesn't start rapidly flashing as it's supposed to - well it does eventually but actually is staying in the same loop as described. I guess the hardware reset isn't working.
The hardware reset is described as a button in the manual, but it's a hole - I pressed a match in the hole.
Any ideas? This router - which has been great - is looking like a brick right now.
Andy Clark
The hardware reset is described as a button in the manual, but it's a hole - I pressed a match in the hole.
Any ideas? This router - which has been great - is looking like a brick right now.
Andy Clark
Andy Clark
Please Log in or Create an account to join the conversation.
- clarkac
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
08 Oct 2010 18:57 #64157
by clarkac
Andy Clark
Replied by clarkac on topic Help! 2820Vn bricked?
Just notice this forum item http://www.forum.draytek.co.uk/viewtopic.php?t=14498&highlight=reset+2820 so will give it a try.
Andy Clark
Please Log in or Create an account to join the conversation.
- clarkac
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
08 Oct 2010 20:00 #64158
by clarkac
Andy Clark
Replied by clarkac on topic Help! 2820Vn bricked?
Tried the above - didn't work got a time out. Noticed these routers are under warranty for 2 years... this one is less than 2 years old..maybe a replacement?!
Andy Clark
Please Log in or Create an account to join the conversation.
- weehappypixie
- Offline
- Member
Less
More
- Posts: 117
- Thank you received: 0
08 Oct 2010 21:19 #64159
by weehappypixie
Replied by weehappypixie on topic Help! 2820Vn bricked?
Are you connected directly to the router via cable?
Have you tried changing the timeout?
I have done this about 50 times or so over the years on various DrayTek bricks and it has cured it every time. It can be recovered.
John
Have you tried changing the timeout?
I have done this about 50 times or so over the years on various DrayTek bricks and it has cured it every time. It can be recovered.
John
Please Log in or Create an account to join the conversation.
- clarkac
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
09 Oct 2010 00:44 #64160
by clarkac
Andy Clark
Replied by clarkac on topic Help! 2820Vn bricked?
Hi John
Yes. connected via cable to port 1 as described. Timed out after about 10 secs, whatever I set the timeout to.
Yes. connected via cable to port 1 as described. Timed out after about 10 secs, whatever I set the timeout to.
Andy Clark
Please Log in or Create an account to join the conversation.
- drewy
- Offline
- Junior Member
Less
More
- Posts: 87
- Thank you received: 0
10 Oct 2010 12:38 #64180
by drewy
Replied by drewy on topic Help! 2820Vn bricked?
last time I had to go through this process I couldn't get it to work with windows 7 (64bit) at all. Reverted to an old laptop running xp and it worked fine.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek