DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820n setup help

  • noblelox
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Nov 2010 14:58 #64760 by noblelox
Vigor 2820n setup help was created by noblelox
Hi, I am trying to correctly configure this router to simply dish out wireless DHCP addresses, then pass all traffic through to our hardware firewall via WAN2 configured as TCP/IP.

My firewall port has an address of 192.168.0.2, so I have configured the WAN2 port to have a static IP address of 192.168.0.3 with a gateway of 192.168.0.2.

I have then configured the LAN, so that it dishes out DHCP addresses in the range of 192.168.0.10 to 192.168.0.50 to which I have tried both 192.168.0.2 and 192.168.0.3 as the gateway, but either way, I am not getting internet on the wireless connected devices.

What setting am I missing to get all traffic from the wireless clients to get directly to the firewall?

Please Log in or Create an account to join the conversation.

More
08 Nov 2010 15:18 #64761 by rothers
Replied by rothers on topic Vigor 2820n setup help
You can't have both the LAN & WAN on the same subnet

Please Log in or Create an account to join the conversation.

  • noblelox
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Nov 2010 16:18 #64762 by noblelox
Replied by noblelox on topic What to do then?
Do I need to use NAT then?

Please Log in or Create an account to join the conversation.

Moderators: Sami