I upgraded my 2800vg firmware to 2.8.2 and am trying to setup a Huawei E160 modem. The list shows the E160G modem as being OK and since they are more or less the same I am hopeful. It seems to get somewhere but the connection is not getting made. My sys log trace is below but I am none to sure what to read from this, can anyone give me any pointers. The E160 is an unlocked O2 modem and I am using it on 3 with APN 3internet and dial string ATDT*99#
Just for fun I tried my Nokia E61 phone with the same settings as for the modem and it worked straight away. (another device to add to the list that works).
Thanks in advance.

Syslog trace
1582010-11-17 22:20:19Jan 1 00:00:04Vigor>>> Dial-up triggered by user : 192.168.1.11 ; proto=udp, to 194.109.6.66 port=13568
1582010-11-17 22:20:20Jan 1 00:00:04Vigor>>> Dial-up triggered by user : 192.168.1.11 ; proto=udp, to 194.109.6.66 port=13568
1662010-11-17 22:20:18Jan 1 00:00:03VigorUSB Device connected to root port #1
1662010-11-17 22:20:19Jan 1 00:00:03VigorUSBD: total number of Configuration = 1
1662010-11-17 22:20:19Jan 1 00:00:03VigorUSB Device VID = 0x12D1 PID = 0x1003
1662010-11-17 22:20:19Jan 1 00:00:03Vigor[3G]USB Modem Detected
1662010-11-17 22:20:19Jan 1 00:00:04VigorUSBD: Interface [0], Alternate Setting [0]
1662010-11-17 22:20:19Jan 1 00:00:04VigorUSBD: Pipe[0] EP = 0x81, Type = 2
1662010-11-17 22:20:19Jan 1 00:00:04VigorUSBD: Pipe[1] EP = 0x01, Type = 2
1662010-11-17 22:20:19Jan 1 00:00:04Vigor[3G]Get Pipe Handle fail 0 0 acf188!!!
1662010-11-17 22:20:19Jan 1 00:00:04Vigor[3G]Restart USB host controller to bring up modem
1662010-11-17 22:20:19Jan 1 00:00:04VigorUSBD: UsbDeviceConnect() failed
1662010-11-17 22:20:20Jan 1 00:00:04VigorUSB Device disconnected from root port #1
1662010-11-17 22:20:25Jan 1 00:00:10VigorUSB Device connected to root port #1
1662010-11-17 22:20:26Jan 1 00:00:10VigorUSBD: total number of Configuration = 1
1662010-11-17 22:20:26Jan 1 00:00:10VigorUSB Device VID = 0x12D1 PID = 0x1003
1662010-11-17 22:20:26Jan 1 00:00:10Vigor[3G]USB Modem Detected
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Interface [0], Alternate Setting [0]
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[0] EP = 0x81, Type = 3
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[1] EP = 0x82, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[2] EP = 0x01, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Interface [1], Alternate Setting [0]
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[0] EP = 0x83, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[1] EP = 0x02, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Interface [2], Alternate Setting [0]
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[0] EP = 0x84, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[1] EP = 0x03, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Interface [3], Alternate Setting [0]
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[0] EP = 0x04, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11VigorUSBD: Pipe[1] EP = 0x85, Type = 2
1662010-11-17 22:20:27Jan 1 00:00:11Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:20:27Jan 1 00:00:11Vigor[3G]Modem status:A1 20 00 00 00 00 02 00 03 00
1662010-11-17 22:20:27Jan 1 00:00:11Vigor[3G]Modem status:A1 20 00 00 00 00 02 00 02 00
1662010-11-17 22:20:30Jan 1 00:00:14Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:20:33Jan 1 00:00:17Vigor[3G]USB Modem initialize successful
1662010-11-17 22:20:42Jan 1 00:00:26VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:20:45Jan 1 00:00:29VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:20:48Jan 1 00:00:32VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:20:48Jan 1 00:00:32VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:20:48Jan 1 00:00:32Vigor[3G]Modem stop
1662010-11-17 22:20:48Jan 1 00:00:32Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:20:52Jan 1 00:00:36Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:20:54Jan 1 00:00:38VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:20:54Jan 1 00:00:38VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:20:54Jan 1 00:00:38VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:20:55Jan 1 00:00:39VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:20:58Jan 1 00:00:42VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:20:58Jan 1 00:00:42VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:20:58Jan 1 00:00:42Vigor[3G]Modem stop
1662010-11-17 22:20:58Jan 1 00:00:42Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:01Jan 1 00:00:46Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:21:04Jan 1 00:00:48VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:04Jan 1 00:00:48VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:04Jan 1 00:00:48VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:21:05Jan 1 00:00:49VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:08Jan 1 00:00:52VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:21:08Jan 1 00:00:52VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:21:08Jan 1 00:00:52Vigor[3G]Modem stop
1662010-11-17 22:21:08Jan 1 00:00:52Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:11Jan 1 00:00:56Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:21:14Jan 1 00:00:58VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:14Jan 1 00:00:58VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:14Jan 1 00:00:58VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:21:15Jan 1 00:00:59VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:18Jan 1 00:01:02VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:21:18Jan 1 00:01:02VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:21:18Jan 1 00:01:02Vigor[3G]Modem stop
1662010-11-17 22:21:18Jan 1 00:01:02Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: DSL Channel = 0
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: PPP Type = 0 (0 : PPPoA, 1 : PPPoE 2:IPoA)
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: Encapsulation Type = 0 (0: VCMUX, 1: LLC, 2: 1483_LLC_BRIDGED, 3: 1483_LLC_ROUTED, 4: 1483_VCMUX_ROUTED, 5: 1483_VCMUX_ROUTED, 6
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: VCI = 38
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: VPI = 0
1662010-11-17 22:21:19Jan 1 00:01:03VigorDSL: modulation type = 4 ( 0 : T1.413, 1 : G.Lite, 2 : G.DMT, 4 : MultiAuto)
1662010-11-17 22:21:21Jan 1 00:01:06Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:21:24Jan 1 00:01:08VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:24Jan 1 00:01:08VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:24Jan 1 00:01:08VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:21:24Jan 1 00:01:08Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:24Jan 1 00:01:09Vigor[3G]Modem initialize [AT+CGDCONT=,,"3internet"]
1662010-11-17 22:21:25Jan 1 00:01:09VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:28Jan 1 00:01:12VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:21:28Jan 1 00:01:12VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:21:28Jan 1 00:01:12Vigor[3G]Modem stop
1662010-11-17 22:21:28Jan 1 00:01:12Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:31Jan 1 00:01:16Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:21:34Jan 1 00:01:18VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:34Jan 1 00:01:18VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:34Jan 1 00:01:18VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:21:34Jan 1 00:01:18Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:34Jan 1 00:01:19Vigor[3G]Modem initialize [AT+CGDCONT=,,"3internet"]
1662010-11-17 22:21:35Jan 1 00:01:19VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:38Jan 1 00:01:22VigorPoE ==> V:1 T:1 PADT ID:0
1662010-11-17 22:21:38Jan 1 00:01:22VigorPoE <== V:1 T:1 PADT ID:0
1662010-11-17 22:21:38Jan 1 00:01:22Vigor[3G]Modem stop
1662010-11-17 22:21:38Jan 1 00:01:22Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:41Jan 1 00:01:26Vigor[3G]Send query command AT+CPIN?
1662010-11-17 22:21:44Jan 1 00:01:28VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:44Jan 1 00:01:28VigorPoE <== V:1 T:1 PADO ID:0
1662010-11-17 22:21:44Jan 1 00:01:28VigorPoE ==> V:1 T:1 PADI ID:0
1662010-11-17 22:21:44Jan 1 00:01:28Vigor[3G]Send init command AT&FE0V1X1&D2&C1S0=0
1662010-11-17 22:21:44Jan 1 00:01:29Vigor[3G]Modem initialize [AT+CGDCONT=,,"3internet"]
1662010-11-17 22:21:45Jan 1 00:01:29VigorPoE <== V:1 T:1 PADO ID:0

It looks like it's not detecting the modem properly - put the 2.8.2.1 beta firmware on it, I found that most of the modems that are listed as supported on the Draytek.com site only work with that firmware version.

Thanks, I tried the beta firmware and that made no difference.
Then I checked the alt adsl version of 2.8.2 which says in the notes that the E160 is supported. I tried that version but no joy. I also borrowed a ZTE modem that was supposedly supported but no joy either. My E61 phone still connects with the same settings.
I am loathed to go and buy another USB modem when I am having so little success. Which modem worked for you? Did you have any specific firmwares on the modem?