DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Wan 1 and 2
- unrealone1
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
30 Nov 2010 15:08 #65083
by unrealone1
Wan 1 and 2 was created by unrealone1
We have a drayek router 2820, with two internet connects, wan 1 and wan 2. The router keeps changing up address because of the two connections. Is it possible to connect some computer to wan 1 and some to wan 2?
Please Log in or Create an account to join the conversation.
- gyre
- Offline
- Junior Member
Less
More
- Posts: 19
- Thank you received: 0
09 Dec 2010 09:37 #65204
by gyre
Replied by gyre on topic Wan 1 and 2
Assuming the 2820 is like my 2920...
You should be able to set a load balance policy that says which wan interface to use depending on what your source IP address is.
On my 2920, it's WAN->Load Balance Policy.
Click on the index 1, then add a rule for your first source IP address to use WAN1 or WAN2 or whatever.
-- gyre --
You should be able to set a load balance policy that says which wan interface to use depending on what your source IP address is.
On my 2920, it's WAN->Load Balance Policy.
Click on the index 1, then add a rule for your first source IP address to use WAN1 or WAN2 or whatever.
-- gyre --
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek