DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820vn firmware upgrade to Firmware 3.3.4.1 = dead router
- 414nsw
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
08 Dec 2010 11:53 #65196
by 414nsw
2820vn firmware upgrade to Firmware 3.3.4.1 = dead router was created by 414nsw
OK, I've just been doing my usual system upgrades and got around to upgrading the firmware in the 2820vn.
All proceeded hickup free, however on reboot I am now unable to obtain an IP address from the box or ping it in any way.
All green lights are on, except the DSL as its disconnected as I have a backup router in place.
I've tried performing a factory reset three times and still cannot get an IP address or ping the box.
I've isolated and directly connected a laptop and still no luck.
Any ideas on how I get this back on-line ?
Thanks,
Nic
All proceeded hickup free, however on reboot I am now unable to obtain an IP address from the box or ping it in any way.
All green lights are on, except the DSL as its disconnected as I have a backup router in place.
I've tried performing a factory reset three times and still cannot get an IP address or ping the box.
I've isolated and directly connected a laptop and still no luck.
Any ideas on how I get this back on-line ?
Thanks,
Nic
Please Log in or Create an account to join the conversation.
- drewy
- Offline
- Junior Member
Less
More
- Posts: 87
- Thank you received: 0
10 Dec 2010 13:31 #65215
by drewy
Replied by drewy on topic 2820vn firmware upgrade to Firmware 3.3.4.1 = dead router
looks like you need to reflash it using the tftp method. Have a search around this forum, you'll find posts with instructions.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek