DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Opal/Nildram couldn't connect with 2820
- robathome
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 53
- Thank you received: 0
20 Dec 2010 08:44 #65312
by robathome
Opal/Nildram couldn't connect with 2820 was created by robathome
From the middle of last week our ADSL 2+ on nildram/pipex/opal hasn't been able to connect to our 2820. Got ADSL but wouldn't login. Opal tell us it connects then drops every 10 seconds, and wouldn't tell us that anything changed their end (of course it must have).
Just put a netgear on there and it connects OK.
After much messing with firmware and in here I found this:
ftp://ftp.draytek.pl/Seria_2820
And lo and behold, the latest 3.3.5.1 annexA is loaded and ADSL is finally connecting. Just posting this to hopefully help someone else in the same position and also to get comments on any likely problems with using this version.
Rob
Just put a netgear on there and it connects OK.
After much messing with firmware and in here I found this:
And lo and behold, the latest 3.3.5.1 annexA is loaded and ADSL is finally connecting. Just posting this to hopefully help someone else in the same position and also to get comments on any likely problems with using this version.
Rob
Please Log in or Create an account to join the conversation.
- NeilH
- Offline
- Member
Less
More
- Posts: 115
- Thank you received: 0
20 Dec 2010 10:24 #65315
by NeilH
Replied by NeilH on topic Opal/Nildram couldn't connect with 2820
The same software is also on draytek.com
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek