DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2130n Bricked...

  • know-dice
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
29 Dec 2010 12:36 #65411 by know-dice
2130n Bricked... was created by know-dice
Trying to return my 2130n to factory default. Pressed the reset button until ACT LED flashed quickly...but unit doesn't reboot just comes back when power cycled with ACT LED on solid.

Can ping unit on it's LAN IP address (I changed this from default) but doesn't respond on web interface or by telnet.

By holding down the reset button and turning the unit I can upload firmware by TFTP (192.168.1.1) but unit still is not accessible and doesn't reboot after upload.

I only have the *.ALL file as the *.RST file doesn't seem to be available.

Any suggestions?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami