DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
AP800 default gateway for administration
- rmb9
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
07 Jan 2011 09:59 #65511
by rmb9
AP800 default gateway for administration was created by rmb9
I've been using AP700s for a while as simple APs and they work fine. So when I saw the AP800 with native PoE I thought it worth testing.
What I see I like but...
As a simple AP with DHCP turned off there is nowhere to configure a default gateway. This means that I can only administer it if I am attached to the same subnet as its administrative interface.
I've looked at the release notes for v1.0.1 and this issue is not mentioned.
Any suggestions?
What I see I like but...
As a simple AP with DHCP turned off there is nowhere to configure a default gateway. This means that I can only administer it if I am attached to the same subnet as its administrative interface.
I've looked at the release notes for v1.0.1 and this issue is not mentioned.
Any suggestions?
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
07 Jan 2011 17:17 #65514
by voodle
Replied by voodle on topic AP800 default gateway for administration
It's definitely added in the 1.0.1 firmware
Please Log in or Create an account to join the conversation.
- rmb9
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
07 Jan 2011 17:32 #65516
by rmb9
Replied by rmb9 on topic AP800 default gateway for administration
Thanks - I'll do an upgrade and check it out.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek