DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Power issue 2800G
- onside
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
18 Jan 2011 10:28 #65700
by onside
Power issue 2800G was created by onside
Hello,
I have a problem with the above router - we've had power supply cuts recently, now the router will not start. The dsl and printer lights flash briefly and then nothing. The power supply unit is providing a steady voltage, so no problem there. This has happened in the past and eventually it started up with repeated attempts but this time it refuses to power up. Any ideas ? Or trash it ?
Cheers,
Jim
I have a problem with the above router - we've had power supply cuts recently, now the router will not start. The dsl and printer lights flash briefly and then nothing. The power supply unit is providing a steady voltage, so no problem there. This has happened in the past and eventually it started up with repeated attempts but this time it refuses to power up. Any ideas ? Or trash it ?
Cheers,
Jim
Please Log in or Create an account to join the conversation.
- onside
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
18 Jan 2011 11:20 #65702
by onside
Replied by onside on topic 2800G power issue - solved
Hello,
Managed to solve it myself !
The PSU was in fact faulty - whilst it tested as showing a good steady voltage, I wasn't convinced that it was good. It must have a fault somewhere - replaced the PSU with a 12v one I found in the workshop and the router powers up perfectly.
Thanks anyway
Cheers,
Jim:oops:
Managed to solve it myself !
The PSU was in fact faulty - whilst it tested as showing a good steady voltage, I wasn't convinced that it was good. It must have a fault somewhere - replaced the PSU with a 12v one I found in the workshop and the router powers up perfectly.
Thanks anyway
Cheers,
Jim
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek