DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Load-Balance Policy using Source Port
- desc
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
21 Jan 2011 14:38 #65778
by desc
Load-Balance Policy using Source Port was created by desc
I would really like the ability to configure Load-Balance policies based on the source port of the data.
The reason for this is to provide the ability to direct all Skype traffic onto a specific WAN connection. Within Skype I can define the application port as 12345.
I am using a 2920 but cannot see any way of achieving this with the current firmware.
The reason for this is to provide the ability to direct all Skype traffic onto a specific WAN connection. Within Skype I can define the application port as 12345.
I am using a 2920 but cannot see any way of achieving this with the current firmware.
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
21 Jan 2011 17:37 #65783
by voodle
Replied by voodle on topic Load-Balance Policy using Source Port
Source port is pretty much useless for specifying traffic (because it's random 99% of the time), with load balancing, you can only specify the outbound traffic, which you do using the Destination port.
If you want to load balance WAN traffic, you've got to do so by controlling which IP the remote service connects to.
If you want to load balance WAN traffic, you've got to do so by controlling which IP the remote service connects to.
Please Log in or Create an account to join the conversation.
- desc
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
23 Jan 2011 01:57 #65803
by desc
Replied by desc on topic Load-Balance Policy using Source Port
I guess asking for a feature purely to support one application is perhaps a little too optimistic
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek