DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DrayTek 2710n Firewall --> Filter --> single ip not ed

  • zillah
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Feb 2011 05:56 #66119 by zillah
Hi Expert

Recently I bought DrayTek Vigor 2710n and when I tried to change source ip and destination ip to suit my requirement under Firewall --> Filter Setup, it was not editable ( can not be rewritten )

please see the snapshot below :

http://img84.imageshack.us/i/forumfirewall.jpg/




http://img211.imageshack.us/img211/7067/singleipaddressisgrayed.jpg




What I am looking is to be able to type in an ip address as shown in the image below ( this is from Vigor 2820 not from mine 2710n)

http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_26594395.html

http://img233.imageshack.us/i/blockrule.jpg




Thanks

Please Log in or Create an account to join the conversation.

  • zillah
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Feb 2011 05:14 #66225 by zillah
Please any help or comment

Thanks

Please Log in or Create an account to join the conversation.

More
12 Feb 2011 10:03 #66226 by nobody
Of course, this should be possible.
Have you:
- tried to use a different browser using default settings (scripting on especially)
- check the enable filter rule checkbox before pushing the edit button
- start with an empty firewall profile instead of editing an existing

I dont have this kind of vigor for testing, however I had a strange thing with a brand new 2930: the standard filter set (1 and 2) presets by the manufacturer refuse editing/deleting at all. But using an empty filter set worked.

Please Log in or Create an account to join the conversation.

  • zillah
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Feb 2011 15:02 #66231 by zillah
Thanks no body

I will try what you have suggested and let you know

Thanks

Please Log in or Create an account to join the conversation.

More
12 Feb 2011 17:40 #66233 by dbames
Replied by dbames on topic Probably the browser
FF4 beta 9 onwards causes some screens not to function correctly on my 2820Vn (they work fine in IE8/Chrome/FF3.6.x however).

Please Log in or Create an account to join the conversation.

  • zillah
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Feb 2011 18:02 #66235 by zillah

tried to use a different browser using default settings


Thanks that fixed the problem

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami