DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2920 to 2920 via Point to Point Ethernet
- kxt308
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank you received: 0
10 Feb 2011 16:25 #66200
by kxt308
2920 to 2920 via Point to Point Ethernet was created by kxt308
Has anybody setup a Point to Point Ethernet using DrayTek 2920 through WAN2.
I have a 10Meg Point to Point and are currently using Cisco 881 routers. I don't know much about them but I do use DrayTek 2820 for normal ADSL usage.
Will it work if I connect the 2 2920 (via WAN2 for the higher throughput) up to the Ethernet Point to Point
Thanks
I have a 10Meg Point to Point and are currently using Cisco 881 routers. I don't know much about them but I do use DrayTek 2820 for normal ADSL usage.
Will it work if I connect the 2 2920 (via WAN2 for the higher throughput) up to the Ethernet Point to Point
Thanks
Please Log in or Create an account to join the conversation.
- jedi98
- Offline
- Member
Less
More
- Posts: 186
- Thank you received: 0
10 Feb 2011 17:35 #66201
by jedi98
Replied by jedi98 on topic 2920 to 2920 via Point to Point Ethernet
I haven't done this but it should work configuring both 2920 with a wan2. Then setting the internet access for wan2 to be static IP with it's own subnet.
Tricky point I guess would be persuading the routing table to send the right traffic to the right place and not round in circles or down a black hole. I see no reason why it should not be do-able though.
Tricky point I guess would be persuading the routing table to send the right traffic to the right place and not round in circles or down a black hole. I see no reason why it should not be do-able though.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek