DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

setup Vigor120 for RRAS and NAT

  • andypaisley
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Feb 2011 22:51 #66292 by andypaisley
setup Vigor120 for RRAS and NAT was created by andypaisley
i got 8 static IP addresses from freeola and needed Vigor120 to use them directly from PC running Windows Server 2008 R2

tested:modem works fine and i have internet connection if i "Set up a new connection or network" wizard. Disconnected and deleted created interface.


now im trying to set up Routing and Remote access
checked LAN and demand-up routing in RRAS config wizard.

Network interfaces -> New Demand-dial interface
Interface name: Remote Router
Connection type: using PPP over Ethernet
Route IP packets on this interface checked
Static routes for remote access: I added IP 0.0.0.0 Gateway 0.0.0.0 metric 254
User name, password.

Right click -> Connect
Connected and connection shown as Active in Ports.

Added NAT (General -> New Routing protocol)
Added "Remote router" as public interface and enabled NAT
Added my LAN adapter as private interface

opening explorer window ..... no connection

what im missing?

Please Log in or Create an account to join the conversation.

Moderators: Sami