DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Firewall to allow a specific port
- nps
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank you received: 0
05 Mar 2011 10:13 #66645
by nps
Firewall to allow a specific port was created by nps
I'm having difficulty getting a soap connection working on a port, say 4433
What do I ahve to set in order for this port to remain open?
I have added it to the open ports. Is this all I need to do. The config is otherwise factory default settings.
What do I ahve to set in order for this port to remain open?
I have added it to the open ports. Is this all I need to do. The config is otherwise factory default settings.
Please Log in or Create an account to join the conversation.
- jedi98
- Offline
- Member
Less
More
- Posts: 186
- Thank you received: 0
06 Mar 2011 01:00 #66653
by jedi98
Replied by jedi98 on topic Re: Firewall to allow a specific port
So, you just want to run a public server for a specific TCP port inside your private network?
You should be able to do that with either NAT >> Port Redirection or NAT >> Open Ports, eg: -
NAT >> Port Redirection
Index No. 1
Enable
Mode: single
Service Name: soap
Protocol: TCP
WAN IP: all
Public Port : 4433
Private IP: 192.168.1.15
Private Port: 4433
Prompts may vary slightly depending on your model / firmware.
You should be able to do that with either NAT >> Port Redirection or NAT >> Open Ports, eg: -
NAT >> Port Redirection
Index No. 1
Enable
Mode: single
Service Name: soap
Protocol: TCP
WAN IP: all
Public Port : 4433
Private IP: 192.168.1.15
Private Port: 4433
Prompts may vary slightly depending on your model / firmware.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek