DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

after enabling vlan i can not access the router 2830n

  • angel12
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Mar 2011 11:08 #66876 by angel12
I'm trying to enable vlans on Vigor 2830n but every time i enable the vlans after that i can not access the cconfiguration interface or ping the 192.168.1.1 from any of the ports even if i put everithing on the same lan exept the one of the wireles. I must be mising something. Any info or advice will be help. I couldn't find any tutorials or discations on the topic.

Please Log in or Create an account to join the conversation.

More
19 Mar 2011 16:17 #66878 by voodle
It's because once you turn on VLAN tagging, the router will only accept traffic from the tags you've specified; there's no facility to set it to accept untagged traffic right now which is a shame : /

You should be able to access it if you set the VLAN tag on your computer manually or you've got a switch that can add a VLAN tag to your PC's traffic.

If you haven't got that available, then just enable VLAN on the VLAN page but do Not enable VLAN Tag for any of the VLANs, just select the ports & SSIDs.

Please Log in or Create an account to join the conversation.

  • angel12
  • Topic Author
  • Offline
  • New Member
  • New Member
More
20 Mar 2011 09:32 #66883 by angel12
Thank you very much this solved it.:)))

Please Log in or Create an account to join the conversation.

Moderators: Sami