DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Portforward firewall
- monty2
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
25 Mar 2011 10:56 #66958
by monty2
Portforward firewall was created by monty2
Hi I have the vigour 2820. I have forwarded a port which works fine but I only need it too be accessed from one but despite setting the Source IP: in the filter to the required one other ips can access the service. I have a couple of pictures that may make it clearer
Please Log in or Create an account to join the conversation.
- roger_vigor
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
25 Mar 2011 12:54 #66961
by roger_vigor
Replied by roger_vigor on topic Re: Portforward firewall
You should probably have a block if not further match as the first rule in set 3, followed by your existing rule as the second.
At present, there is nothing to block other addresses.
At present, there is nothing to block other addresses.
Please Log in or Create an account to join the conversation.
- monty2
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
28 Mar 2011 10:30 #66993
by monty2
Replied by monty2 on topic Re: Portforward firewall
That worked fine thank you
Please Log in or Create an account to join the conversation.
- kingster
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
28 Mar 2011 15:43 #67000
by kingster
Replied by kingster on topic Re: Portforward firewall
I am doing the same thing and despite blocking traffic I can still access RDP traffic from secondary ip addresses. Can anyone help, below is my blocking rule.
Many thanks
Many thanks
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
28 Mar 2011 19:45 #67005
by voodle
Replied by voodle on topic Re: Portforward firewall
Your problem there is that you need to set the Source Port to 1-65535, this is always random for incoming traffic like this so once you've changed that, the rule should then work.
Please Log in or Create an account to join the conversation.
- kingster
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek