DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
VIGOR 2920 Blocks Everything - HELP NEEDED
- vamsikolli
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
04 Apr 2011 08:57 #67100
by vamsikolli
VIGOR 2920 Blocks Everything - HELP NEEDED was created by vamsikolli
I have VIGOR 2920 dual wan router and I have two ISP providers. The only thing I couldnt figure out is I couldnt use magicjak, yahoo, msn , aim all the IM clients. I didnt mess up the settings becuase I never been into the settings. Please help me how to open the ports for all the IM clients and Magicjak. Thanks in advance.
Please Log in or Create an account to join the conversation.
- j03y
- Offline
- Junior Member
Less
More
- Posts: 61
- Thank you received: 0
04 Apr 2011 15:07 #67108
by j03y
Replied by j03y on topic Re: VIGOR 2920 Blocks Everything - HELP NEEDED
There are two ways you could go about this. You could enable the ports manually but you shouldn't have to do this. The easiest way is to enable Universal Plug and Play (UPnP) on the router which I believe is disabled by default on Draytek routers. Your OS then requests the ports to be open as and when needed.
To do this open the configuration page. On the left hand side click applications then UPnP. Check all the options on the page then click OK. After a reboot you should be able to use these applications.
To do this open the configuration page. On the left hand side click applications then UPnP. Check all the options on the page then click OK. After a reboot you should be able to use these applications.
Please Log in or Create an account to join the conversation.
- vamsikolli
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
06 Apr 2011 04:46 #67136
by vamsikolli
Replied by vamsikolli on topic Re: VIGOR 2920 Blocks Everything - HELP NEEDED
I will try that today. Thank you.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek