DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2710n Slow Internet
- markfc
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
06 Apr 2011 13:44 #67145
by markfc
2710n Slow Internet was created by markfc
Hi,
Just installed a 2710n to replace a BT Router. Since then the internet keeps dropping connection.
I've put new filters on.
Should I be worried about the high RX CRC errors.
Thanks
Just installed a 2710n to replace a BT Router. Since then the internet keeps dropping connection.
I've put new filters on.
Code:
LAN Status Primary DNS: 194.72.9.38 Secondary DNS: 62.6.40.162
IP Address TX Packets RX Packets
192.168.1.254 6190 7639
WAN 1 StatusWLAN 1 Status >> Drop PPPoA
Enable Line Name Mode Up Time
Yes SDSLADSLEthernetFiberWireless Client BT PPPoA 0:28:46
IP GW IP TX Packets TX Rate(Bps) RX Packets RX Rate(Bps)
xx.xxx.xxx.xxx xxx.xx.xxx.x 12505 150 10198 69
WAN 3G 2 Status Primary DNS: Secondary DNS:
Enable Line Name Mode Up Time
No 3G USB Modem --- 00:00:00
IP GW IP TX Packets TX Rate(Bps) RX Packets RX Rate(Bps)
--- --- 0 0 0 0
Status Base Station ID Signal Strength(RSSI) Signal Quality(CINR)
SDSL InformationADSL Information ( SDSLADSL Firmware Version: 232201_A)
ATM Statistics TX Cells RX Cells TX CRC errs RX CRC errs
60499 94617 0 35868
SDSL StatusADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att.
ADSL2+(G.992.5) SHOWTIME 1207087 18542285 3 19
Should I be worried about the high RX CRC errors.
Thanks
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
06 Apr 2011 15:18 #67148
by voodle
Replied by voodle on topic Re: 2710n Slow Internet
Yep that's a bad amount of RX CRC errors, it's disconnecting because of that right now and is probably connecting slowly because of that too.
Try out the 211801 modem code from this page and also check the cabling to the router because the SNR is quite low at 3 which it won't normally be with a BT connection (should be 6)
http://www.visus.pt/mirrors/draytek/Vigor2710/Firmware/V3.3.5.1/
Try out the 211801 modem code from this page and also check the cabling to the router because the SNR is quite low at 3 which it won't normally be with a BT connection (should be 6)
Please Log in or Create an account to join the conversation.
- markfc
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
06 Apr 2011 15:59 #67151
by markfc
Replied by markfc on topic Re: 2710n Slow Internet
Cool thanks.
I check the modemcode as soon as that link becomes active.
It seems dead at the moment
I check the modemcode as soon as that link becomes active.
It seems dead at the moment
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek