DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
3300+ Connectivity Issue
- andrewkeywood
- Topic Author
- Offline
- Banned
Less
More
- Posts: 3
- Thank you received: 0
07 Apr 2011 15:27 #67172
by andrewkeywood
3300+ Connectivity Issue was created by andrewkeywood
Have recently purchased a new 3300+ and installed this week using three ADSL WAN's, but every day 3-4 times the Vigor requires power recyle due to lost of connectivity, has anyone else experienced this. Have discouted all except config or faulty 3300+
Please Log in or Create an account to join the conversation.
- able
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
14 Apr 2011 10:53 #67294
by able
Replied by able on topic Re: 3300+ Connectivity Issue
I would need to know a lot more about your setup before I would conclude faulty hardware, most likely it isn't
make sure you have latest firmware, that your setup is correct (balancing? how?) what modems you use, provider, speeds, protocols, static ip's etc etc etc
there is so much you can do wrong and not even notice that it's hard to help with this little information.
(connection detection using arp or ping, no-reply count ?)
let me know more and i may be able to help you
make sure you have latest firmware, that your setup is correct (balancing? how?) what modems you use, provider, speeds, protocols, static ip's etc etc etc
there is so much you can do wrong and not even notice that it's hard to help with this little information.
(connection detection using arp or ping, no-reply count ?)
let me know more and i may be able to help you
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek