DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2710vn and O2 ISP
- ashokdey
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
08 Apr 2011 19:46 #67187
by ashokdey
Vigor 2710vn and O2 ISP was created by ashokdey
Hi, i've followed the instructions provided by O2 for setup and i cannot connect to the internet. i'm using a wired connection for now. I get assigned an IP address (192.168.1.10) but when I check the online status it goes from ready to handshaking. Seems to keep doing this. I'm on the O2 works package (LLU) I believe. Grateful for any assistance with this. thanks. Ash
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
Less
More
- Posts: 225
- Thank you received: 0
09 Apr 2011 00:15 #67192
by macavity
Replied by macavity on topic Re: Vigor 2710vn and O2 ISP
Do you have Annex M ? If so set the routers modulation manually to Annex M. If not then setting the modulation to Multimode should be fine. If that still doesn't get SHOWTIME then try a different modem code. The FTP site has various ones available FTP://FTP.draytek.com
Also, make sure you've got the adsl cable connected to the port labeled DSL not the line port.
Also, make sure you've got the adsl cable connected to the port labeled DSL not the line port.
Please Log in or Create an account to join the conversation.
- ashokdey
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
09 Apr 2011 13:05 #67194
by ashokdey
I had it set to ADSL2+AnnexM as per the instructions of O2, that didnt work for me, so I changed it to ADSL2(G.992.5) and that works. I'm using the latest firmware - 3.3.6_232201, is that ok to use as I've read there are issues with it. How do I know which modem code is the right one? thanks
Replied by ashokdey on topic Re: Vigor 2710vn and O2 ISP
Do you have Annex M ? If so set the routers modulation manually to Annex M. If not then setting the modulation to Multimode should be fine. If that still doesn't get SHOWTIME then try a different modem code. The FTP site has various ones availableMacavity wrote:
FTP://FTP.draytek.com
Also, make sure you've got the adsl cable connected to the port labeled DSL not the line port.
I had it set to ADSL2+AnnexM as per the instructions of O2, that didnt work for me, so I changed it to ADSL2(G.992.5) and that works. I'm using the latest firmware - 3.3.6_232201, is that ok to use as I've read there are issues with it. How do I know which modem code is the right one? thanks
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek