DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
3200 issues with WAN static IP
- kk20
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
13 May 2011 10:37 #67735
by kk20
3200 issues with WAN static IP was created by kk20
I am having real trouble configuring mine.
WAN1 & 2 -> enabled always on
WAN 3 -> backup when all failed
WAN1 static IP ethernet 10.1.0.0/16 WAN2 DHCP ethernet (both from conventional thomson routers)
WAN3 static IP 82.108.xxx.xxx/29 internet facing SDSL
I cannot get WAN3 configuration to "stick" unless I choose DHCP client. I cannot get *ANY* sort of IP address to stick in WAN3 (even if I replicate WAN1 settings) - when the 3200 reboots after configuring WAN3 (and I tried WAN4) the configuration resets to "none"
Any ideas?
WAN1 & 2 -> enabled always on
WAN 3 -> backup when all failed
WAN1 static IP ethernet 10.1.0.0/16 WAN2 DHCP ethernet (both from conventional thomson routers)
WAN3 static IP 82.108.xxx.xxx/29 internet facing SDSL
I cannot get WAN3 configuration to "stick" unless I choose DHCP client. I cannot get *ANY* sort of IP address to stick in WAN3 (even if I replicate WAN1 settings) - when the 3200 reboots after configuring WAN3 (and I tried WAN4) the configuration resets to "none"
Any ideas?
Please Log in or Create an account to join the conversation.
- kk20
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
13 May 2011 10:49 #67739
by kk20
Replied by kk20 on topic Re: 3200 issues with WAN static IP
NVM
factory reset. updated firmware to 3.3.7, factory reset again just in case.
works now.
factory reset. updated firmware to 3.3.7, factory reset again just in case.
works now.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek