DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
separating SIP from general web traffic
- lintentech
- Topic Author
- Offline
- Banned
Less
More
- Posts: 5
- Thank you received: 0
14 May 2011 17:12 #67759
by lintentech
separating SIP from general web traffic was created by lintentech
Hi, i'm trying to setup by 2820 so all SIP related traffic goes through WAN1 and all other general web browseing traffic goes through WAN2.
I've bind the MAC to IP for each of the 4 SIP phones (Snom 320's) and setup a load balancing rule for the 4 IPs to use WAN1 and another rule for the remaining IP's to use WAN2 but I just cannot get it to work when i enable the rule the SIP phones just lose there registrations and cannot re-register
does anyone else have this sort of setup who might be able to point me in the right direction?
Cheers
Dan
I've bind the MAC to IP for each of the 4 SIP phones (Snom 320's) and setup a load balancing rule for the 4 IPs to use WAN1 and another rule for the remaining IP's to use WAN2 but I just cannot get it to work
does anyone else have this sort of setup who might be able to point me in the right direction?
Cheers
Dan
Please Log in or Create an account to join the conversation.
- lyj_e1
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
17 May 2011 14:58 #67819
by lyj_e1
Replied by lyj_e1 on topic Re: separating SIP from general web traffic
Hi,
Have you made sure the open ports needed for the SIP phones are pointing to the same WAN as the phones?
Lyj
Have you made sure the open ports needed for the SIP phones are pointing to the same WAN as the phones?
Lyj
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek