DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
O2 provider and Vigor 2830
- nrwatson
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
25 May 2011 23:05 #67917
by nrwatson
O2 provider and Vigor 2830 was created by nrwatson
I am having problems setting the router up with O2 provider
they tell me that I need to disable the POPe/POPa but with the wizard this doesn't seem to be an option
Tahnks Neale
they tell me that I need to disable the POPe/POPa but with the wizard this doesn't seem to be an option
Tahnks Neale
Please Log in or Create an account to join the conversation.
- samwelle
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
25 May 2011 23:55 #67918
by samwelle
Replied by samwelle on topic Re: O2 provider and Vigor 2830
Hi Neale
Not sure how you would do this through the wizard, I've been connected to o2 for a year or two. Under WAN > Internet Access >WAN1 > I have the 'PPPoE / PPPoA' tab set to Disabled. The second tab, for 'MPoA (RFC1483/2684)' is set to enabled with the following settings:
Multi-PVC channel: Channel 2
Encapsulation: MPoA/1483 Bridged IP LLC
VPI:0 VCI:101
Modulation: ADSL2+ annex M
WAN Connection Detection: Always On
& the o2 IP/DNS settings.
Maybe you can bypass the wizard by choosing the default settings then amending here, I seem to remeber it taking me a while to figure. This works fine for me, however o2 will give you the required info if you need it.
Sam
Not sure how you would do this through the wizard, I've been connected to o2 for a year or two. Under WAN > Internet Access >WAN1 > I have the 'PPPoE / PPPoA' tab set to Disabled. The second tab, for 'MPoA (RFC1483/2684)' is set to enabled with the following settings:
Multi-PVC channel: Channel 2
Encapsulation: MPoA/1483 Bridged IP LLC
VPI:0 VCI:101
Modulation: ADSL2+ annex M
WAN Connection Detection: Always On
& the o2 IP/DNS settings.
Maybe you can bypass the wizard by choosing the default settings then amending here, I seem to remeber it taking me a while to figure. This works fine for me, however o2 will give you the required info if you need it.
Sam
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek