DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Restricting bandwidth of PS3
- daveray
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
02 Jun 2011 22:16 #68035
by daveray
Restricting bandwidth of PS3 was created by daveray
Hi
I use a 2820n and a 50mbps cable modem. I use this for my home based office and it works well.
Sadly my son loves his PS3 and plays a lot of on-line games. I need to find a way to allocate him a fixed bandwidth of 5mbps down and 0.5mbps up so he doesn't start to affect my work. I have noticed that at times it can slow my response times on the work I am doing. I trade the sports markets on Betfair so I need the quickest response I can get.
I looked at QoS but can I specify xxx.xxx.168.72 as the start and also xxx.xxx.168.72 as the end IP?
I am just looking for the best way to do this
Thanks in advance
Dave
I use a 2820n and a 50mbps cable modem. I use this for my home based office and it works well.
Sadly my son loves his PS3 and plays a lot of on-line games. I need to find a way to allocate him a fixed bandwidth of 5mbps down and 0.5mbps up so he doesn't start to affect my work. I have noticed that at times it can slow my response times on the work I am doing. I trade the sports markets on Betfair so I need the quickest response I can get.
I looked at QoS but can I specify xxx.xxx.168.72 as the start and also xxx.xxx.168.72 as the end IP?
I am just looking for the best way to do this
Thanks in advance
Dave
Please Log in or Create an account to join the conversation.
- nobody
- Offline
- Member
Less
More
- Posts: 115
- Thank you received: 0
03 Jun 2011 00:19 #68036
by nobody
Replied by nobody on topic Re: Restricting bandwidth of PS3
Yes, you can limit his bandwidth this way - using the bandwith limit feature.
I found out that in my home, if you enable the bandwith limiting feature, this will reduce the overall performance of the router.
But, there is a better way, Disable the bandwidth limiting feature, but use the QoS feature, and give yourself a minimum Bandwidth.
This way, if you dont need the bandwidth everyone else can use it.
In the QoS setup, create a class with your IP as the source, destination any, and, give yourself 50%
make a make a class with your sons IP, and, give it 10% bandwidth guarantee.
Make a third class, source any, destination any, add http, https, pop3 protocol or, whatever is needed, and give it 20%
I found out that in my home, if you enable the bandwith limiting feature, this will reduce the overall performance of the router.
But, there is a better way, Disable the bandwidth limiting feature, but use the QoS feature, and give yourself a minimum Bandwidth.
This way, if you dont need the bandwidth everyone else can use it.
In the QoS setup, create a class with your IP as the source, destination any, and, give yourself 50%
make a make a class with your sons IP, and, give it 10% bandwidth guarantee.
Make a third class, source any, destination any, add http, https, pop3 protocol or, whatever is needed, and give it 20%
Please Log in or Create an account to join the conversation.
- daveray
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
03 Jun 2011 14:39 #68046
by daveray
Replied by daveray on topic Re: Restricting bandwidth of PS3
Hi Nobody, thanks for the detailed reply.
I tried the bandwidth limiter and like you I soon realised it had slowed everything. I am mid trading today so later I will try your method and see how it goes.
Thanks again for taking the time reply, very good of you.
Dave
I tried the bandwidth limiter and like you I soon realised it had slowed everything. I am mid trading today so later I will try your method and see how it goes.
Thanks again for taking the time reply, very good of you.
Dave
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek