Hi Guys,
the router stats for my ADSL connection only show one Attenuation and SNR margin figure unless i'm missing something?
is there a way to see the upsteam and downstream figures seperately?
Code:
> show adsl
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 7584000 bps US Actual Rate : 832000 bps
DS Attainable Rate : 7904000 bps US Attainable Rate : 1044000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 16 US Interleave Depth : 2
NE Current Attenuation : 34 dB Cur SNR Margin : 7 dB
DS actual PSD : 19. 8 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 232201_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 20 dB Far SNR Margin : 9 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
Also have you guys got any tips for tweaking the ADSL connection (snr margin etc..),
It appears the 2830 has a reduced set of commands compaired to say a 2820
Code:
> adsl
% Valid subcommands are:
txpct rxpct status ppp bridge idle
drivermode reboot oamlb vcilimit annex showbins
optn fdmec savecfg vendorid atm
I ran the "ADSL SHOWBINS" and the router reported the Bits per bin, but no SNR or dB figures?? (all zero's)
One last thing, I'm waiting for our ISP/BTw to move us onto the ADSL2+ equipment but was looking at putting Annex M on our line,
I've read on some forums talk of flashing a different modem code if using annex M,
My router is currently on Firmware Version : 3.3.6.1db_232201
Cheers
Matt
