I want to collect ATM Statistics (TX Cells, RX Cells, TX CRC errs, RX CRC errs) from syslog running on my 2820n.

I'm collecting ADSL Status (Mode, State, Up Speed, Down Speed, SNR Margin, Loop Att.) using WallWatcher receiving on port 514 on my server.
But it doesn't ever seem to get CRC error counts.

Can anyone help?

According to Draytek Support, you can't get CRC data using syslog on the vigor 2820n.

But it is possible (in case anyone else is interested) using the SNMP agent on the vigor watched by an SNMP monitor running elsewhere.

Anyone tried this?

I Don't recall seeing those stats in the MIB tree for the 2820.

If you have the OID's to hand could you post them up & I will take a look.

Thanks.

Not sure how to upload a file (can't see where to do that).
So here's the link on draytek's site: http://www.draytek.co.uk/support/download/SNMP.zip

Ahh yes. But just because something is in the MIB tree doesn't mean the device can deal with it...

An example is;
SNMPv2-SMI::transmission.94.1.1.10.1.1 = No Such Object available on this agent at this OID

which is;
adslAtucChanReceivedBlks

The only objects returned by the 2820 in the 'transmission' branch of the tree are;

SNMPv2-SMI::transmission.94.1.1.1.1.1.4 = INTEGER: 2
SNMPv2-SMI::transmission.94.1.1.1.1.2.4 = INTEGER: 3
SNMPv2-SMI::transmission.94.1.1.1.1.3.4 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::transmission.94.1.1.1.1.4.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.1.1.5.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.3.1.1.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.3.1.2.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.3.1.3.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.3.1.4.4 = INTEGER: 6
SNMPv2-SMI::transmission.94.1.1.3.1.5.4 = Gauge32: 28
SNMPv2-SMI::transmission.94.1.1.3.1.6.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SNMPv2-SMI::transmission.94.1.1.3.1.7.4 = INTEGER: 12
SNMPv2-SMI::transmission.94.1.1.3.1.8.4 = Gauge32: 18108000
SNMPv2-SMI::transmission.94.1.1.4.1.1.4 = Gauge32: 0
SNMPv2-SMI::transmission.94.1.1.4.1.2.4 = Gauge32: 17661041
SNMPv2-SMI::transmission.94.1.1.4.1.3.4 = Gauge32: 0
SNMPv2-SMI::transmission.94.1.1.4.1.4.4 = Gauge32: 0
SNMPv2-SMI::transmission.94.1.1.5.1.1.4 = Gauge32: 0
SNMPv2-SMI::transmission.94.1.1.5.1.2.4 = Gauge32: 888888
SNMPv2-SMI::transmission.94.1.1.5.1.3.4 = Gauge32: 0
SNMPv2-SMI::transmission.94.1.1.5.1.4.4 = Gauge32: 0

For some reason my MIB's are not mapping and displaying the actual names (things like sync etc) but that's all the router will give up. I'd suspect (from conversations with Draytek UK) that we are not going to get much more SNMP support at the moment... If you look at my last thread you will see they broke the wan interface counters on the latest version of firmware and I'm trying to get that fixed.

I have already raised questions asking for the following;

Ethernet interfaces for the wired ports
Wireless OID's
The missing ADSL-LINE OID's

I suspect I won't get any of those however.

Thanks...I think my brain just exploded.

It's a good thing I didn't really need to get error counts...