DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Another 2820vn "bricked" after firmware update
- hsclater
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 27
- Thank you received: 0
20 Feb 2012 23:18 #71290
by hsclater
Another 2820vn "bricked" after firmware update was created by hsclater
I just read the post with the same subject further down, I have exactly the same issue.
Attempted to upgrade firmware from the web interface of a newly reset router. Seemed to go OK, asked to reboot, never came back again.
I just have the square of solid lights with DSL not on.
It wont go into TFTP mode, the ethernet ports don't light up so the PC doesnt even get a link up. I can't ping it using a static IP when apparently in TFTP - the left 3 lights do go on for a minute or so when I do this, then it clicks and goes back to the square of 8 lights.
Can anyone help please?
Attempted to upgrade firmware from the web interface of a newly reset router. Seemed to go OK, asked to reboot, never came back again.
I just have the square of solid lights with DSL not on.
It wont go into TFTP mode, the ethernet ports don't light up so the PC doesnt even get a link up. I can't ping it using a static IP when apparently in TFTP - the left 3 lights do go on for a minute or so when I do this, then it clicks and goes back to the square of 8 lights.
Can anyone help please?
Please Log in or Create an account to join the conversation.
- hsclater
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 27
- Thank you received: 0
21 Feb 2012 13:46 #71294
by hsclater
Replied by hsclater on topic Re: Another 2820vn "bricked" after firmware update
Are there any Draytek engineers in this forum who support these devices?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek