DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2830Vn + IPv6
- eric.jansen
- Offline
- Junior Member
Less
More
- Posts: 36
- Thank you received: 0
10 Sep 2012 23:22 #73455
by eric.jansen
Replied by eric.jansen on topic Re: 2830Vn + IPv6
Draytek UK have recently released a new Beta Firmware for 2830 / 2830n sb 3.6.3RC4a Beta firmware (IPv6).
Build in optional IPv6 (can be disabled via GUI) and whole list of additional non IPv6 related fixes / addons:
http://www.draytek.co.uk/support/download/v2830sb_a4_363RC4a.zip
******************************************************************************
Firmware Release Notes for Vigor 2830 series (single band)
Firmware Version : 3.6.3 RC4a
Build Date : 16th August 2012
Applicable Models : Vigor2830, 2830n (single band)
Modem Code : 232201
Locale : UK Only / Annex A Only
******************************************************************************
Note: This is a beta firmware. Prior to upgrade please backup your configuration
file and obtain a copy of the formal release firmware
Please report all findings to support viahttp://www.draytek.co.uk/support/techquery.html
[New Features]
1. IPv6 support added
2. Support for Smart Bandwidth Limit added
3. SNMP v3 support added
4. Support for QoS retagging added
5. Support for ADSL PVC to PVC binding added
6. Support for Fragfinn added
7. VoIP Wizard added
8. Each LAN Subnet now supports setting an individual DNS setting
9. New SMS & Mail Service Object added
10. New load-balance policy function supports the routing requirements for IP
routing subnets
11. User Management now supports Web Authentication using either HTTPS or HTTP
Build in optional IPv6 (can be disabled via GUI) and whole list of additional non IPv6 related fixes / addons:
******************************************************************************
Firmware Release Notes for Vigor 2830 series (single band)
Firmware Version : 3.6.3 RC4a
Build Date : 16th August 2012
Applicable Models : Vigor2830, 2830n (single band)
Modem Code : 232201
Locale : UK Only / Annex A Only
******************************************************************************
Note: This is a beta firmware. Prior to upgrade please backup your configuration
file and obtain a copy of the formal release firmware
Please report all findings to support via
[New Features]
1. IPv6 support added
2. Support for Smart Bandwidth Limit added
3. SNMP v3 support added
4. Support for QoS retagging added
5. Support for ADSL PVC to PVC binding added
6. Support for Fragfinn added
7. VoIP Wizard added
8. Each LAN Subnet now supports setting an individual DNS setting
9. New SMS & Mail Service Object added
10. New load-balance policy function supports the routing requirements for IP
routing subnets
11. User Management now supports Web Authentication using either HTTPS or HTTP
Please Log in or Create an account to join the conversation.
- gadgetmva
- Offline
- Junior Member
Less
More
- Posts: 28
- Thank you received: 0
15 Sep 2012 07:26 #73506
by gadgetmva
Your ISP is being very naughty then. Your ISP can't arbitrarily decide to go IPv6 and cut-off IPv4 customers. Perhaps they've actually said they're going IPv6 for new connections which is logical and understandable.
IPv4 will be around for a very, very long time. The important thing to remember is will be no new/free IPv4 addresses very soon, Europe had just been given its final allocation for example. IPv4 and IPv6 can cohabit quite nicely together and can cross communicate. The only scenario which can effect you (mattlintott) is where you get a new site and IPv6 is the only option available. Then, and only then, you will need to worry about IPv6 and have equipment that is able to handle both protocols.
Replied by gadgetmva on topic Re: 2830Vn + IPv6
I have about 20 2820N units and 5 2030N units, all very much new purchases, and my ISP have just announced that they are rolling out IPv6 next month, and if the modem in use doesn't support it, tough go get a new one! So that will be 25 branch offices offline or without the ability to have a VPN tunnel up. Come on guys these are cracking bits of kit for the money, we need answers on this before we jump elsewhere!mattlintott wrote:
Your ISP is being very naughty then. Your ISP can't arbitrarily decide to go IPv6 and cut-off IPv4 customers. Perhaps they've actually said they're going IPv6 for new
IPv4 will be around for a very, very long time. The important thing to remember is will be no new/free IPv4 addresses very soon, Europe had just been given its final allocation for example. IPv4 and IPv6 can cohabit quite nicely together and can cross communicate. The only scenario which can effect you (mattlintott) is where you get a new site and IPv6 is the only option available. Then, and only then, you will need to worry about IPv6 and have equipment that is able to handle both protocols.
Please Log in or Create an account to join the conversation.
- xela
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
16 Sep 2012 12:58 #73516
by xela
Replied by xela on topic Re: 2830Vn + IPv6
Oh! This is big news. Really glad to see that Draytek haven't abandoned this model and are adding IPv6 support.
Please Log in or Create an account to join the conversation.
- eric.jansen
- Offline
- Junior Member
Less
More
- Posts: 36
- Thank you received: 0
18 Sep 2012 17:25 #73541
by eric.jansen
Replied by eric.jansen on topic Re: 2830Vn + IPv6
Draytek UK now lists the Vigor 2830 as being IPv6 Ready, however no details on official IPv6 Firmware ?
http://www.draytek.co.uk/products/vigor2830.html
Please Log in or Create an account to join the conversation.
- eric.jansen
- Offline
- Junior Member
Less
More
- Posts: 36
- Thank you received: 0
11 Oct 2012 09:25 #73796
by eric.jansen
Replied by eric.jansen on topic Re: 2830Vn + IPv6
DrayTek Vigor2830 Series Delivers the IPv6 ready for ADSL2/2+ Business Network
Official IPv6 firmware for 2820 SB released on Draytek.com:
http://draytek.com/index.php?option=com_content&view=article&id=1676:draytek-vigor2830-series-delivers-the-ipv6-ready-for-adsl2-2-business-network&catid=13&Itemid=182&lang=en
Official IPv6 firmware for 2820 SB released on Draytek.com:
Please Log in or Create an account to join the conversation.
- stuart elliott
- Offline
- Junior Member
Less
More
- Posts: 14
- Thank you received: 0
12 Oct 2012 08:21 #73808
by stuart elliott
Replied by stuart elliott on topic Re: 2830Vn + IPv6
I just installed
that
yesterday, and now the wireless settings have vanished.
*edit* ./js/webcfg.js has the WLAN settings set to HIDE for some reason, so they don't show up on the menu.
*edit* ./js/webcfg.js has the WLAN settings set to HIDE for some reason, so they don't show up on the menu.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek