DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2920 on 3.6.0 - packet loss\erratic
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
22 Dec 2012 14:57 #74602
by babis3g
Replied by babis3g on topic Re: 2920 on 3.6.0 - packet loss\erratic
Sorry don't know what to suggest after that
Maybe disable qos(check there if is any setting sill on) Bandwidth Management >> Quality of Service
DoS and un-tick the option for priority to voip(this is new feature)
also do add manually at internet access the adsl2+ or something in that section if is only the BE connection or is just bridged pppoe?
mine was fine with 3.6.0 but xmas when i will have time off for 3 days i may put back mine as well (chance to upgrade it- i see many improvements)
Maybe disable qos(check there if is any setting sill on) Bandwidth Management >> Quality of Service
DoS and un-tick the option for priority to voip(this is new feature)
also do add manually at internet access the adsl2+ or something in that section if is only the BE connection or is just bridged pppoe?
mine was fine with 3.6.0 but xmas when i will have time off for 3 days i may put back mine as well (chance to upgrade it- i see many improvements)
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
30 Dec 2012 03:32 #74636
by babis3g
Replied by babis3g on topic Re: 2920 on 3.6.0 - packet loss\erratic
Updated mine with 3.6.3 and all fine
Just a small report
Seems it struggle little with the speed.I do get 100mb but i can see the speedometer struggles and sometimes will not reach fully
also if will turn ipv6 off there is not access to wan> internet access page and giving error 500
When turn on ipv6 is fine and wan>internet access working normal
As for your issue did you ask the support what they suggesting? can try & the utility firmware upgrade tool
Just a small report
Seems it struggle little with the speed.I do get 100mb but i can see the speedometer struggles and sometimes will not reach fully
also if will turn ipv6 off there is not access to wan> internet access page and giving error 500
When turn on ipv6 is fine and wan>internet access working normal
As for your issue did you ask the support what they suggesting? can try & the utility firmware upgrade tool
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek