Bought the Vigor 2960 to replace the 2950. The VPN setup is quite different and can't setup the IPSec VPN for Mac OS X 10.7, only the PPTP VPN works. There is no problem when using the 2950 to setup the IPSec VPN for Mac.

I've setup the following options but not work:

1) Enable all the items in "Remote Access Control"
2) PPP General Setup has tried all the Authenticate Protocol
3) IPSec General Setup has enter the Preshared Key, WAN Profile and DHCP Lan Profile
4) VPN Profiles has been created using PSK as the Auth Type and Security Protocol is ESP, for Remote Dial-in is on


The firmware version of the 2960 is 1.0.5.1.

Am I missing something to set ?
Anyone can help ?

Thanks