DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor2830 Load Balance Question
- streetsam
- Topic Author
- Offline
- New Member
-
23 Feb 2013 04:00 #75301
by streetsam
Vigor2830 Load Balance Question was created by streetsam
Hi All,
Work brought a whole lot of 2830vns, so to get to know them I've borrowed one
I have a Demon fixed ip ADSL2+ (1.6/0.7KBps) (I'm 6 miles, of cable, from the exchange) in WAN1 and a Virgin dynamic ip cable modem (60/0.7KBps) in WAN2
My question is; why can't I get the load balancing to favour the Virgin cable?
I started off with the figures above in the WAN/General Setup/Line speed and the Load Balance Mode set to Line Speed, that didn't work.
Then I decided to decrease the Demon up-speed to 0.02KBps and kept the other figures the same, my thinking was to decrease the requests going out on the Demon ADSL, but this didn't work either.
Then I tried Auto Weight, this didn't work either, the router always seems to prefer the Demon ADSL.
I'm guessing I've missed something. sorry if it is obvious.
Steve
Work brought a whole lot of 2830vns, so to get to know them I've borrowed one
I have a Demon fixed ip ADSL2+ (1.6/0.7KBps) (I'm 6 miles, of cable, from the exchange) in WAN1 and a Virgin dynamic ip cable modem (60/0.7KBps) in WAN2
My question is; why can't I get the load balancing to favour the Virgin cable?
I started off with the figures above in the WAN/General Setup/Line speed and the Load Balance Mode set to Line Speed, that didn't work.
Then I decided to decrease the Demon up-speed to 0.02KBps and kept the other figures the same, my thinking was to decrease the requests going out on the Demon ADSL, but this didn't work either.
Then I tried Auto Weight, this didn't work either, the router always seems to prefer the Demon ADSL.
I'm guessing I've missed something. sorry if it is obvious.
Steve
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
-
Moderators: Chris, Sami