Hi
I wonder if anyone can help or if this is even possible. But I have 2 networks which I would like to route through the 1 router - Draytek 2830N.
I have 1 link which is ADSL and another which is 3G. Currently I have a standard router for the ADSL side and use the Draytek for the 3G.

What I would like is to have both networks running through the Draytek, however this is where it gets slightly complicated...

The LAN side for both are different and I can't figure out how to set up a 2nd LAN.

ADSL LAN is 10.208.1.xx
3G LAN is 10.208.192.xx

Eventually I would like to have 2 wireless SSID's running - 1 for ADSL and 1 for 3G so I can connect to the correct one for the network I want to use.

Is this possible to do and if so, how would I do this please?

Thanks

Enable VLan
Create the 2nd subnet in the LAN settings and use the tick boxes on the appropriate ports to assign the different LAN to it.

There are a few different way to do this, you can use DOT1Q protocol as well if you have tagged VLANs on the switches also.