Hello
My old V120 died so I've bought a shiney new V130 to use in conjunction with my 2830Vn-plus.

The specs show that the Wan2 port on the router and the Wan port on the V130 both support 1000Mb/s speeds.

I've tried various cables (Cat5e and Cat 6) but do not see the second led light on the router (right hand side of port) light up.

I presume this indicates that the connection is running at 100Mb/s not 1Gb/s - am I correct?

So, anyone got any further ideas what to try? (assuming my conclusion about the speed indication led is correct, of course)

Thanks.

It is 1000Gb/s capable.

I have noticed the same issue, both when connecting a V130 directly to a router or via a switch, both of which support Gigabit.
Telnetting into the V130, it reports the connection is at 100 Mbps. The other devices are set to auto negotiation.

Code:

> port 1 status % Port 1 Status: Auto Negotiation > port status % port 1 : link UP , speed= 100 Mbps, duplex= FULL, FlowControl= ON >

> port status
% port 1 : link UP , speed= 1000 Mbps, duplex= FULL, FlowControl= ON
>

Mine is okay, connected to router or direct to laptop

I've now had a chance to test this out against a couple of different switches. The V130 connects at gigabit with most devices but with one switch (Netgear) it connects at 100 Mbps. Perhaps there's simply an incompatability with this one device.