So, I have my internet connection up and running with a dynamic IP address, using just the Draytek, not the provided BT modem, or the TalkTalk router.

I have 4 static IP addresses allocated, which I'd like to use so that one server on my (home) network has its own public IP address, but I can't for the life of me work out how.

This setup http://www.draytek.co.uk/support/guides/kb-isp-talktalk describes using MPoA Static/Dynamic WAN setup, but I only seem able to connect when the PPPoA/PPPoE option is enabled.

Am I missing something obvious here?

Not sure if talktalk is somehow different from other ISP's but

http://www.draytek.co.uk/support/guides/kb-vigor-multinat?return=5081427

works for me on Zen.

don't tick the join NAT IP pool options for any addresses other than the top one and don't forget to open or forward the required port(s) from the WAN IP address you choose for it to your server's internal IP address. If you forward port 80 its probably best to change the default router http port from 80 to something else. I use 8080.

Alternative methods are available http://www.draytek.com/index.php?option=com_k2&view=item&id=5660&Itemid=293&lang=en

Hi paulbailey. Could you please lend a hand by describing your connection settings to TalkTalk Business Fibre. I have a Vigor 2860n with the latest firmware but can't get it to connect directly with TalkTalk VDSL. It syncs ok at the correct speed but connection status remains at 'SHOWTIME'. Did you need to type in a connection username and password. Also I too have 4 static IPs bundled with the service. Do I need specific settings because of this even if only need 1 static IP. Thanks