Hi All

MY Vigor 2860n has stopped allowing connections between local ip's. I cant ping any addresses, remote desktop or access web gui's of various services I have running.
I cant see anything obvious in the firewall, I know I recently updated the firmware but can't remember changing anything else.
All the other devices connected to the Lan are working correctly and port forwarding is working correctly.
I'm stumped

Any ideas?

Thanks

A couple of ideas: -
* VLAN has got turned on and now each port thinks is on a separate VLAN (LAN >> General Setup & LAN >> VLAN)
* DMZ got turned on with a FW update recently and caused a few upsets especially with IPv6 but possibly v4 too (LAN >> General Setup)

If you change DMZ or IPv6 setting reboot even if it does not prompt for reboot.

I do have vlan enabled but SSID2 is the only item in VLAN1 everything else is in VLAN0 so I dont think its that.
DMZ had a tick under DHCP 192.168.7.1
Ive tried deselecting and rebooting still no joy

EDIT:- correction I can ping my server just cant connect to any web gui