DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2860n - How to reset Line Statistics

  • mrtimdog
  • Topic Author
  • User
  • User
More
31 May 2016 09:40 #1 by mrtimdog
Vigor 2860n - How to reset Line Statistics was created by mrtimdog
I have a Vigor 2860n and would like to reset the line statistics displayed on the DSL Status page (CRC, FECS, ES, etc.).

Does anyone know if and how this can be done?

Cheers,
Tim

Please Log in or Create an account to join the conversation.

More
06 Mar 2017 11:49 #2 by aweaton
Replied by aweaton on topic Re: Vigor 2860n - How to reset Line Statistics
Bump.
I would like to do this too. Any one know a way of doing this? I can't see a telnet command to do this.

Please Log in or Create an account to join the conversation.

More
06 Mar 2017 15:36 #3 by jedi98
Replied by jedi98 on topic Re: Vigor 2860n - How to reset Line Statistics
Do you mean the 'Near End'? Those reset when you reboot the router or the modem (CMD vdsl reboot).
Or do you mean the 'far end'? Those, AFAIK, are held by the cabinet line card (BT openreach) and are only reset when DLM decides to or when the cabinet looses power or reboots.

Please Log in or Create an account to join the conversation.

  • florenceanne1
  • User
  • User
More
30 May 2017 10:05 #4 by florenceanne1
Replied by florenceanne1 on topic Re: Vigor 2860n - How to reset Line Statistics
Can someone explain the meaning of some of this information first why has vigor confused things by placing the more information under the wrong sides top part says far and near then after the line it changes to near then far. Information below is from the telnet which has the information correct but when you look at the webinterface status they get mixed up and gives snr on up the downstreams snr.

Code:
vdsl status ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Running Mode : 17A State : SHOWTIME DS Actual Rate : 74842000 bps US Actual Rate : 19999000 bps DS Attainable Rate : 73243788 bps US Attainable Rate : 23044000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 1 US Interleave Depth : 1 NE Current Attenuation : 14 dB Cur SNR Margin : 5 dB DS actual PSD : 6. 4 dB US actual PSD : 13. 4 dB NE CRC Count : 0 FE CRC Count : 59768 NE ES Count : 0 FE ES Count : 51635 Xdsl Reset Times : 0 Xdsl Link Times : 1 ITU Version[0] : b5004946 ITU Version[1] : 544e0000 VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support] Power Management Mode : DSL_G997_PMS_L0 Test Mode : DISABLE -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 16 dB Far SNR Margin : 14 dB CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da48c

Please Log in or Create an account to join the conversation.

  • florenceanne1
  • User
  • User
More
30 May 2017 10:06 #5 by florenceanne1
Replied by florenceanne1 on topic Re: Vigor 2860n - How to reset Line Statistics
When you look at the webinterface information you realise they get the figures mixed and start to put the upstream info on downstream this doesn't help when trying to figure out what is causing the errors.

Code:
Vendor ID:b5004946 544e0000 ATU-C Information Vendor ID:b5004244 434da48c [BDCM] Line Statistics Downstream Upstream Actual Rate 74842Kbps 19999Kbps Attainable Rate 73462Kbps 23012Kbps Path Mode Fast Fast Interleave Depth 1 1 Actual PSD 6. 4dB 13. 4dB ----------------------------------------------------------- Near End Far End Trellis ON ON Bitswap ON ON ReTx 0 1 SNR Margin 5dB 14dB Attenuation 14dB 16dB CRC 12s 59791s FECS 0s 815263s ES 1s 51656s SES 0s 6s LOSS 0s 0s UAS 27s 28568s HEC Errors 0 0 RS Corrections 0 0 LOS Failure 0 0 LOF Failure 0 0 LPR Failure 0 0 NCD Failure 0 0 LCD Failure 0 0 NFEC 254 32 RFEC 16 16 LYSMB 5374 16

Please Log in or Create an account to join the conversation.