Hello,
I've been given the task of deciphering a couple of our old 3300v firewall configs to work out how to 'translate' these for a new setup. Specifically interested in the following:
- (long shot!) Does a configuration emulator exist so I can load my config to a Windows based GUI to then extract the logic/details?
or
- can some one give me a description of the configuration parameters, example:
firewall_ip_filter_2=any,,any,,0,-1,-1,0,1723,-1,Pass,none,5,1,0,0,1
What do each of the 17 comma separated elements represent and what are the possible options for the enumerated lists?

I've got 34 ip_filter rules to decode, so any help with the above would be very much appreciated.

Thanks
Si

There is no interpreter for those.

I can guess some of them:

Index No. firewall_ip_filter_2
Source Address : any
, (Might be protocol TCP/UDP etc.)
,
Dest Address : any,
, (Might be protocol TCP/UDP etc.)
0,
-1
-1
Src. Port : 0,
Des. Port : 1723 (these might be the other way around)
-1,
Action if Matched : Pass,
none,
5,
1,
0,
0,
1